Question 1

How do I reset a Hotpoint washing machine?

Accepted Answer

To reset most models, turn the appliance off, unplug it for 10–15 minutes, then power it back on. This acts as a master reset Hotpoint washing machine method. Some models also support a button-press reset. If the error persists after trying how to reset Hotpoint washing machine steps, there may be a deeper control board or wiring issue.

Question 2

Why does my Hotpoint washer have all lights flashing?

Accepted Answer

Flashing lights often mean a general electronic fault, wiring issue or software error affecting the machine. It may also occur during an electrical fault Hotpoint washing machine event such as a power surge. Try a reboot or reset. If lights continue flashing, the model may be one of the Hotpoint washing machine models affected by errors and that’s when you should have an engineer inspect it.

Question 3

Can I fix an F02 error myself?

Accepted Answer

The F02 error relates to worn motor brushes or tachometer issues. You can inspect the motor connections and, if confident, replace carbon brushes on Hotpoint motors. However, if the Hotpoint drum not turning issue continues or you’re unsure about removing panels, this is a good time to consider when to call an engineer for safe diagnosis.

Question 4

What causes the F08 error?

Accepted Answer

Error F08 usually means the heater element or relay has failed. Limescale, wiring faults and burned components are common causes. If your Hotpoint washing machine is not heating, the element may be worn and you might need to replace Hotpoint heater element parts. This fault often requires a technician because it can be linked to PCB relay failure.

Question 5

What is the difference between F07 and F08?

Accepted Answer

F07 points to a heater circuit or triac issue on the control board, while hotpoint error F08 refers to a faulty heater element or relay. In simple terms, F07 is usually a control board problem, while F08 is caused by the element itself. Both may lead to a Hotpoint washing machine not heating, but the repair steps differ.

Question 6

Why is my Hotpoint washer not spinning?

Accepted Answer

A Hotpoint washing machine not spinning can be caused by blocked filters, drainage problems, worn brushes or imbalance in the drum. Clearing the filter may help. Many users start by trying to clear Hotpoint pump blockage issues. If the drum struggles or stops mid-cycle, it may indicate motor wear or an F02-related problem.

Question 7

What should I do if my machine beeps but won't start?

Accepted Answer

A beeping Hotpoint washer often means the door isn’t locking, a start sequence hasn’t been confirmed, or there’s a deeper fault. Some models are part of the Hotpoint recall door lock issue, which can trigger failure to start. Check the latch, control panel and run a reset. If you smell anything unusual, like a Hotpoint washing machine burning smell, unplug immediately and get professional help.

LATEST FROM OUR BLOG

Hotpoint Washing Machine Error Codes & Expert Repair in London

FAQ

Hotpoint Washing Machine Error Codes & Expert Repair in London

What Is the Ideal Fridge and Freezer Temperature?

Samsung Washing Machine Error Codes: Full List and Troubleshooting Guide

How to Troubleshoot Common Bosch Washing Machine Problems

How to Clean a Fridge Drain Hole: Your Troubleshooting Guide

Common Tumble Dryer Faults and How to Fix Them

Why is My Washing Machine Door Seal Leaking and How to Fix It

How to Stop a Washing Machine from Moving When Spinning

Common Cooker Extractor Hood Problems

Why Do Fridge Freezers Need Time To Settle?

Need More Help With Your Enquiry?