Kitchen Appliance Repairs in Tamworth: Same-Day, No Call-Out Fee

Washing machine repairs

If your washer is not draining, won’t spin, or is leaking, your Domex engineer is happy to carry out the repairs and will focus on the right component, be it the control board for PCB failures, an unbalanced load causing the drum to stop, the detergent drawer clogging causing leaks or your spin speed dropping unexpectedly. Some of the brands we regularly fix include Indesit, Beko and LG.

Dishwasher repairs

A common fault with dishwashers not cleaning is that the wash programme is not completing. Other challenges can include soil sensor faults, door seal leaks causing water on floor and the detergent pod not dissolving. Rest assured, your Domex engineer will find the root cause and fix it.

Fridge repairs

It can happen that you experience your fridge warming after the door is opened frequently. This is often caused by door seal wear. Other faults that your fridge might encounter include evaporator icing blocking airflow and a start relay failure on the compressor.

Fridge freezer repairs

Is your fridge section running warm while the freezer remains cold? This is one of the most reported symptoms, often caused by a thermistor failure, the damper door sticking open and a blocked defrost drain.

Freezer repairs

If your freezer is not reaching the target temperature after heavy loading, you hear a noisy compressor at startup or you are experiencing ice maker blockages, rest assured Domex is ready to help with reliable diagnostics and repairs.

Oven repairs

For those of you who have oven door seal damage causing heat loss and uneven baking, then the main oven element is likely at fault and has failed. However, you need an expert to determine whether it’s also not related to a selector switch fault or thermostat drifting. Our Gas Safe registered engineers cover gas oven and range repairs, too.

Cooker and hob repairs

Cookers and hobs can malfunction for many reasons. But one of the most common ones is a gas burner crown blockage preventing ignition. You may also encounter wok burner low-flame issues or your ceramic hob surface cracking, affecting zone function. Please note that any gas work requires Gas Safe registration, which our engineers possess.

Tumble dryer repairs

When your dryer is not spinning or is overheating, call on us for help. Domex engineers regularly note that these faults often need a heat pump condenser deep clean. Other times, the issue may lie in a door switch fault preventing drum start or the drum paddle snapping, causing clothes to bunch.

Extractor hood repairs

We often see that extractor hoods have worn carbon filters, restricting airflow in recirculating models. We also see touch-pads not responding and chimney-section motor speeds stuck on high. Whatever the fault, we can fix it.

How it works

1. Book a time that suits you: call 0330 210 2100 or use our online quote tool for the earliest slot in Tamworth.
2. Follow your repair in real time via My Repair: see your technician’s name, photo and ETA before they arrive.
3. Pre-visit call: Your technician calls about 30 minutes ahead of arrival to confirm they’re on the way.
4. Arrival and initial prep: On arrival, they show ID, lay down protective shoe covers and work from a fully stocked van. Note that most of the faults are resolved in a single visit.
5. Digital receipt and guarantee: A digital receipt and 12-month guarantee are issued once the job is complete.